Peugeot/Citroen +OBDII – i970

Professional Multi-system Scanner i970 for Peugeot/Citroen
i970 Multi-system Scanner supports full system diagnosis. It’s a powerful DIY tool, test modes include: CANBUS, ISO9141, KWP2000, J1850 etc.. It enables technicians to accurately diagnose complex problems.

Features for Peugeot/Citroen: 
•  Read DTCs
•  Clear DTCs
•  Read live data stream
•  Single Brand of all Models ( OBDII-16 DLC )
•  Full system diagnosis
•  Upgrade via USB 2.0
•  Multi-language

Eight Super Advantages:  
1. The fastest full color, 2.8” TFT 320*240 pixels 
2. USB 2.0 High Speed Upgrade
3. Support Multi-language
4. Read & Clear DTCs
5. Read Date Stream
6. Silicone keys with great customer experience
7. Full System Diagnosis
8. Diagnose Single Brand of all Models ( OBDII-16 DLC )

OBDII function:  
1. Read Codes
2. Erase Codes
3. I/M Readiness — I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream 
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

System Coverage for Citroen :  
•  Engine
•  ABS
•  SRS
•  Subsystems
•  BSI
•  Additional heating(Chauff‐add)
•  Control panel
•  Radio
•  CD player(Changeur‐cd)
•  Parking aid
•  Alarm(Alarme_texton)
•  Switch module at the steering wheel
•  Services module
•  Rain sensor/Brightness
•  Multifunction display SAGEM A
•  Multifunction display SAGEM B
•  Gearbox
•  Electric machine management ECU
•  Traction battery cell management ECU
•  Display or telematics
•  Onboard charger of the traction battery
•  Multiplexed additive adding pump
•  Passenger compartment compartment air heanting
•  Resistor
•  Bodywork Conversion Unit
•  Air conditioning compressor
•  Multifunction screen
•  Driver’s door control panel
•  Driving school mode
•  Engine relay unit
•  Hands Free Kit
•  High frequency receiver
•  Multiplexed diesel additive pump
•  Instrument panel
•  Seat belt reminder LED

Vehicle Coverage:: 
• Berlingo (1996‐2002)
• Berlingo2 (2002‐2008)
• BERLINGO Electric (B9e) ( 2012‐>)
• Berlingo(B9) (2008‐2012)
• C1 (2005‐>)
• C2 CANBUS (2006‐>)
• C2 VAN (2003‐2006)
• C3 (2002‐2006)
• C3 A51 (2010‐2012)
• C3 Ai51 (2012‐>)
• C3 AIRCROSS (Ai58) (2012‐>)
• C3 PICASSO (2008‐>2012)
• C3 PICASSO (A58) (2012‐>)
• C3 PICASSO (Ai58) (2013‐>)
• C3 PLURIEL (2002‐2009)
• C3 R (2006‐2009)
• C4 (2004‐2010)
• C4 PICASSO (2006‐2012)
• C4 PICASSO(B78) (2012‐>)
• C4(B7) (2010‐>)
• C4L(B7) (2012‐>)
• C4 Aircross (2008‐>)
• C4 SEDAN (2008‐2012)
• C5 (2001‐2005)
• C5 R (2004‐2007)
• C5(X7) (2007‐>)
• C6 (2006‐2008)
• C8 CAN (2005‐>)
• C8 VAN (2002‐2005)
• C‐CROSSER (2010‐>)
• C‐ELYSEE(M3_M4) (2013‐>)
• C‐ELYSEE 4 (2008‐2012)
• C‐ELYSEE 5 (2008‐2012)
• C‐QUATRE 4 (2010‐>)
• C‐QUATRE 5 (2010‐>)
• C‐TRIOMPHE (2006‐2009)
• C‐ZERO (2012‐>)
• DS3 (2010‐>2014)
• DS4 (2011‐>)
• DS5 (2012‐>)
• DS5 Hybird 4 (2013‐>)
• ELYSEE (2000‐2008)
• FUKANG (1992‐2000)
• FUKANG 988 (1992‐2000)
• JUMPER 3/RELAY 3 (2005‐>2007)
• JUMPER 3 Minibus/RELAY 3 Minibus (2007‐2010)
• JUMPER 3 Euro 5 (2010‐>)
• JUMPY /DISPATCH (1994‐2000)
• JUMPY 2 /DISPATCH 2 (2000‐2006 )
• JUMPY 3 /DISPATCH 3 (2006‐>)
• NEMO (2008‐>)
• SAXO (1996‐2005)
• SYNERGIE/EVASION ( 1997‐2000 )
• XANTIA (1993‐2002)
• XANTIA2 (1993‐2002)
• XM (1989‐1996)
• XM mux (1996‐2001)
• XSARA (1997‐2003)
• XSARA2 (1997‐2003)
• XSARA PICASSO (1999‐2007)
• XSARA PICASSO CHINE (2001‐2007)
• ZX‐2 (1991‐1996)
• ZX‐16 (1991‐1996)

System Coverage for Peugeot : 
• Petrol engine
• Diesel engine
• AT
• ABS
• Subsystems
• Built‐in systems interface(BSI)
• Airbag ECU
• Vehicle protection/Management of accesses
• Driving assistance/Comfort
• Inform the driver/Audio/Communication
• Built‐in systems interface(BSI)
• Visibility/Lighting/Signalling
• BSI
• IP
• Driver information
• Active and passive safety
• A/C
• Air bag
• Electric power steering
• Trailer relay unit
• Parking aid
• Rain and brightness sensor
• Instrument panel
• Multiplexed control panel
• Multiplexed additive pump
• Switch module under the steering wheel
• ABS or ESP ECU
• ABS/traction control
• Gearbox
• Injection

Vehicle Coverage for Peugeot: 
• 106REMODELAGE (1996‐2004)
• 107 (2005‐>)
• 1007 CAN (2006‐2009)
• 1007 VAN (2005‐2006)
• 206 (1998‐2001)
• 206 MUX (2001‐2008)
• 206 + (2008‐>)
• 207CAN (2007‐>)
• 207 VAN (2007‐>)
• 207i (2010‐>)
• HOGGAR (2010‐>)
• 3008 (2009‐>)
• 306 (1993‐1997)
• 306REMODELA GE (1997‐2002)
• 307 VAN (2001‐2005)
• 307 CAN (2005‐>)
• 308 (2007‐>)
• RCZ (2010‐>)
• 405 (1987‐1996)
• 406 (1995‐1999)
• 406 COUPE (1995‐1999)
• 406R (1999‐2001)
• 406R COUPE (2001‐2003)
• 407 (2004‐2010)
• 408 (2010‐>)
• 508 (2011‐>)
• 4007 (2008‐>)
• 607 VAN (1999‐2004)
• 607 R (2004‐2010)
• 806 (1994‐2002)
• 807 VAN (2002‐2005)
• 807 CAN (2005‐>)
• 5008 (2010‐>)
• BIPPER (2008‐>)
• PARTNER (1997‐2008)
• PARTNER B9 (2008‐>)
• EXPERT (1995‐2007)
• EXPERT 2 (1995‐2007)
• BOXER (1981‐2006)
• BOXER 3 (2006‐2011)
• BOXER 3 minibus (2006‐>)
• 208 (2012‐>)
• 301 (2013‐>)
• 2008 (2013‐>)
• 3008 HYdrid4 (2009‐>)
• 3008_Chine (2009‐>)
• 508 RXH ( 2011‐> )
• 508HYBrid4 (2011‐>)
• iON (2012‐>)
• 207+ (2012‐>)
• 208 ai91 (2012‐>)
• 308 4 portes (2007‐>)
• EXPERT 3 (2007‐>)
• BOXER3_Euro5 (2011‐>)
• 4008 (2012‐>)
• 605 (1899‐1998)
• PARTNER Electric(B9e) (2012‐>)

Specifications 
A) Display: 2.8” Color screen , 320 x 240 pixels display with contrast adjustment
B) Operation Temperature: 0 ℃ — 50 ℃
C) Storage Temperature:  -20 ℃  —  70 ℃
D) Power:  9V — 18V
E)Operating current:100mA@12V(Typical)
F)Power consumption:1.2W(Typical)
G)Dimension:121mm*86mm*26mm(LxWxH)
H)Weight:300g

Contents:
• Hardcopy User’s Manual
• 3-foot OBD II cable
• USB cable
• Nylon carry case

Support Multi-Language:
Below languages are now available: 
• English
• German
• Spanish
• French
• Portuguese
• Russian
• Dutch

Below languages are under developing: 
• Turkish
• Polish
• Italian
• Hungaria

———————————————————————————————————————————————-

Below is the instruction for option B. 

If you don’t know how to do update,pls check this video first: updating video for option B

When choosing option B, please make sure to follow exactly the following instruction step by step.

The updating instruction for option B is quite different from option A. It is not necessary for you to download the update software package to your computer. But you need to make sure your computer is well connected to internet because option B obtains update database from remote server directly via iCarsoft Updating Tool automatically and completes update.

• Step 1: Please click the link below to download the iCarsoft updating tool. 
iCarsoft  Updating Tool for First Generation Product. 

• Step2: Uncompress the iCarsoft Updating Tool you just downloaded. 
• Step3: Install the iCarsoft Updating Tool in your computer. onto your computer. 
• Step 4: After installation, connect the scanner to the computer USB port via the USB cable. ( Please make sure your internet is well connected during the updating period. ) 
• Step 5: Run the iCarsoft Updating Tool. 
• Step6: For detailed updating steps, please click the link to check below. 

Detailed instructions for Updating

———————————————————————————————————————————————–

Function List Download: 
• iCarsoft Multi-system Scanner for Peugeot/Citroen i970 (Citroen_Function_List, Peugeot_Function_List)

User Manual Downloading: 
Please click “ download user manual “ button to download the user manual you need.

———————————————————————————————————————————————-

Stickers: 
Pls put the below two stickers onto the location which the arrow points to as soon as you receive the goods.

36pcs per carton: 

Sufficient Stock: