Prenta 
Product Description:
Mipa Stone chip protection-Spray is an overcoatable, durable elastic protection against stone-chips, corrosion, de-icing salt and mechanical wear. Also suitable as an anti-noise compound, sealing film and underbody protection.Reliable long-term protection for spoilers, skirting and doors.
Substrate:
Vehicle flooring, wheel arches, spoilers, sills etc.
Pretreatment / Cleansing:
Pre-cleansing with Mipa Silikonentferner
Characteristics:
Fast drying
Durable elasticity
No sagging, drips or runs
Once fully cured, re-coatable with all customary painting systems
Abrasion resistant
Excellent ant-noise properties
Resistance against ageing
Slight structure effect
____________________________________________________________________________________________
Colour: Light grey (0000) / black (0001)
Grade of Gloss: Matt
____________________________________________________________________________________________
Preparation: Shake can vigorously until the mixing balls move freely!
Application: Spray to test – Spraying distance approx. 25 – 30 cm2 – 3 coats, dry film thickness 300 – 450 μm.
After use:Turn can upside down and spray until the valve is clean, this prevents the valve from clogging up.
____________________________________________________________________________________________
Drying Times:
Dust dry: 20 Min.
Re-coatable: 2 – 4 h
____________________________________________________________________________________________
Processing: From +10°C and up to 80% relative air humidity.
Conditions: Do not spray on the motor, gears, brakes etc.
Storage: In tightly closed original containers at least 2 years shelf life
VOC-EC Regulation:
limiting value for the product (cat. B/e): 840 g/l (2007)
This product contains a maximum of 510 g/l VOC [ 4.26 lbs/gal]
Safety Information: Read the corresponding Material Safety Data Sheet!
____________________________________________________________________________________________
Tengdar vörur
