Audi/VW/Seat/Skoda + OBDII Scanner i908 + OBDII

•  Read DTCs
•  Clear DTCs
•  Read live data stream
•  Single Brand of all Models ( OBDII-16 DLC )
•  Full system diagnosis
•  Upgrade via USB 2.0
•  Multi-language

Eight Super Advantages:
1. The fastest full color, 2.8” TFT 320*240 pixels
2. USB 2.0 High Speed Upgrade
3. Support Multi-language
4. Read & Clear DTCs
5. Read Date Stream
6. Silicone keys with great customer experience
7. Full System Diagnosis
8. Diagnose Single Brand of all Models ( OBDII-16 DLC )

OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness — I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports all the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on all 2001 and later OBDII compliant PETROL European vehicles
20. Works on all 2004 and later OBDII compliant DIESEL European vehicles
21. Works on all 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

System and Vehicle coverage for Audi and Seat:

Vehicles produced before 2007:
01 Engine electronics
02 Transmission Electronics
03 Brake Electronics
08 AC/Heating electronics
25 Immobilizer
34 Self leveling suspension
15 Airbags
16 Steering Wheel Electronics
44 Steering assistance
35 Central Locking
17 Instrument Cluster
19 Gateway data bus
37 Navigation
46 Central Control Module
76 09 Electronic Ctrl Electronics
Parking aid
55 Headlight range control
56 Radio
65 Tyre pressure monitoring
05 ACCESS & PERMISSI.
07 DISPLAY‐/CNTL UNIT
53 Parking Brake
22 4WD Electronics
26 Electric roof control
29 Left light control
39 Right light control
54 Rear spoiler
75 Emergency call module
42 DRIVER‐DOOR ELECT.
52 PASSE.‐DOOR ELECT.
62 LR‐DOOR ELECTRONI.
72 RR‐DOOR ELECTRONI.
0E Media player position 1
4F Electronic central electric II
3C Lane Departure Assistance System
5F Information Electronic Equipment 1
  

Vehicles produced after 2007:

01 Engine electronics
02 Transmission Electronics
08 AC/Heating electronics
25 Immobilizer
15 Airbags
17 Instrument Cluster            

System and Vehicle coverage for VW:es produced after 2007:

•  Vehicle coverage:
•  Caddy
•  Corrado
•  Golf Cabrio
•  Eos
•  Fox
•  Golf Citi
•  Golf/Jetta II
•  Golf/Vento III
•  Golf/Bora IV
•  Jetta IV
•  Golf/Jetta V
•  Golf/Jetta VI
•  Gol/Par/Sav/Poi
•  Gol/Par/Sav/Poi
•  Gol Special
•  New Beetle
•  New Beetle NAR
•  New Beetle
•  New Beetle Cab
•  New Beetle Cab NAR
•  New Bora
•  Lavida
•  Lupo
•  Passat B3
•  Passat B4
•  Passat B5
•  Passat B6
•  Passat CC
•  Phaeton D1
•  Polo
•  Polo Classic
•  Scirocco
•  Sharan I
•  Tiguan
•  Tiguan NAR
•  Touareg
•  Touareg NAR
•  Transporter
•  Touran

System coverage:

01 Engine electronics
03 Brake Electronics
15 Airbags
25 Immobilizer
46 Central Control Module
56 Radio
02 Transmission Electronics
08 AC/Heating electronics
09 Electronic Ctrl Electronics
10 Parking Assist System 2
16 Steering Wheel Electronics
17 Instrument Cluster
18 Aux heating
19 Gateway data bus
37 Navigation
3D Special Function
42 DRIVER‐DOOR ELECT.
44 Steering assistance
52 PASSE.‐DOOR ELECT.
55 Headlight range control
69 TRAILER FUNCTION
76 Parking aid
77 TELEPHONE
7D Auxiliary Heater
35 Central Locking
1C Vehicle Position Detection
26 Electric roof control
2E Media player position 3
47 Soundsystem
65 Tyre pressure monitoring
62 LR‐DOOR ELECTRONI.
63 DRVS BOARDING ASS1
72 RR‐DOOR ELECTRONI.
73 DRVS BOARDING ASS2
76 Parking aid
41 Diesel pump electronics
22 4WD Electronics
29 Left light control
36 Driver`s side seat adj.
39 Right light control
57 TV‐TUNER
75 Emergency call module
0F Radio Tuner‐Digital
4F Electronic central electric II
13 Distance control
14 Wheel damping electronics
54 Rear spoiler
45 Interior Monitoring
05 ACCESS & PERMISSI.
53 Parking Brake
5D Opertion
07 DISPLAY‐/CNTL UNIT
23 BRAKER BOOSTER
27 DIS./CTL UNIT REAR
28 Climate Control Unit Rear
34 Self leveling suspension
38 ROOF ELECTRONICS
66 Seat‐/mirror adjust.
68 WIPER ELECTRONICS
71 Battery charger
64 Stabilizers
32 Locking Electronisc
3C Lane Departure Assistance System
6D Electronic Equipment of Trunk Lid
6E Roof Display/Control Head
0D Sliding Door Left
78 SLIDING DOOR
2D Voice Amplification

System and Vehicle coverage for SKODA: 

Vehicle coverage:
Citigo ( 2012 and later )
Fabia I ( 1996 to 2008 )
Fabia II ( 2007 to 2010 )
Fabia ( 2011 and later )
Felicia ( 1995 to 2001 )
Octavia I ( 1997 to 2011 )
Octavia II ( 2004 to 2013 )
Octavia ( 2013 and later )
Rapid ( 2013 and later )
Roomster ( 2006 to 2011 )
Superb I  ( 2002 to 2008 )
Superb II ( 2008 and later )
Yeti ( 2010 and later )

System coverage: 

01 Engine electronics
02 Transmission Electronics
03 Brake Electronics
08 AC/Heating electronics
09 Electronic Ctrl Electronics
10 Parking Assist System 2
15 Airbags
16 Steering Wheel Electronics
17 Instrument Cluster
18 Aux heating
19 Gateway data bus
22 4WD Electronics
25 Immobilizer
36 Driver`s side seat adj.
37 Navigation
3D Special Function
42 DRIVER‐DOOR ELECT.
44 Steering assistance
46 Central Control Module
47 Soundsystem
52 PASSE.‐DOOR ELECT.
55 Headlight range control
56 Radio

Specifications 

A) Display: 2.8” Color screen , 320 x 240 pixels display with contrast adjustment
B) Operation Temperature: 0 ℃ — 50 ℃
C) Storage Temperature:  -20 ℃  —  70 ℃
D) Power:  9V — 18V
E)Operating current:100mA@12V(Typical)
F)Power consumption:1.2W(Typical)
G)Dimension:121mm*86mm*26mm(LxWxH)
H)Weight:300g

Contents: 

Hardcopy User’s Manual
6-foot OBD II cable
USB cable
Nylon carry case

Support Multi-Language: 

Below languages are now available:
English
German
Spanish
French
Portuguese
Russian
Dutch

Below languages are under developing:  

ETurkish
Polish
Italian
Hungarian

———————————————————————————————————————————————-

Below is the instruction for option B.

If you don’t know how to do update,pls check this video first: updating video for option B

When choosing option B, please make sure to follow exactly the following instruction step by step.

The updating instruction for option B is quite different from option A. It is not necessary for you to download the update software package to your computer. But you need to make sure your computer is well connected to internet because option B obtains update database from remote server directly via iCarsoft Updating Tool automatically and completes update.

• Step 1: Please click the link below to download the iCarsoft updating tool.
iCarsoft  Updating Tool for First Generation Product.

• Step2: Uncompress the iCarsoft Updating Tool you just downloaded.
• Step3: Install the iCarsoft Updating Tool in your computer. onto your computer.
• Step 4: After installation, connect the scanner to the computer USB port via the USB cable. ( Please make sure your internet is well connected during the updating period. )
• Step 5: Run the iCarsoft Updating Tool.
• Step6: For detailed updating steps, please click the link to check below.

Detailed instructions for Updating

———————————————————————————————————————————————–

Function List Download:
• iCarsoft Multi-system Scanner for Audi/VW/Seat/Skoda i908 (Function List) 

User Manual Downloading:          
Please click “ download user manual “ button to download the user manual you need.

———————————————————————————————————————————————-

Stickers:
Pls put the below two stickers onto the location which the arrow points to as soon as you receive the goods.