Olíuþrýstingsmælir

OIL PUMP PRESSURE TESTER:

Oil pump tester, tests oil pump pressure and also low oil warning devices.

HANDY CASE: Oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap.

Pressure held gauge with quick release valve (release pressure)

Supplied in a case complete with steel adapters (see sizes listed below), seals, and fittings. Range 0-10 bar.

Engine
Oil / Transmission Fluid Pressure Gauge to 140 PSI or 10bar for use
with most cars (imports and domestic), trucks, and other motor vehicles,
most engines

Instructions for use:

1. Run the engine until normal operating temperature is reached

2. Referring to the vehicle manufacturer´s workshop manual, remove or disconnect part of the oil pressure circuit and connect the required adaptor in its place.

3. Connect the hose and gauge assembly to the adaptor.

4. Start the engine and follow the vehicle manufacturer´s instructions for testing.

5. Make a note of the reading and switch engine off.  Now compare results with those readings given by the vehicle manufacturer.

Sizes:

Plug no.1 = R1/8″ DIN 2999

Plug no.2 = 1/8″ x 27 NPT

Plug no.3 = 1/4″ x 18 NPT

Plug no.4 = 3/8″ x 20 UNF

Plug no.5 = 1/2″ x 20 UNF

Plug no.6 = M10

Plug no.7 = M12

Plug no.8 = M14

Plug no.9 = M16

Plug no.10 = M18

L = 90° elbow