Topplyklasett – Gear lock – Go through

• especially suitable for screw connections with long thread overhang, e.g. threaded rods
• no limited depth like “normal” sockets

includes the following tools:

13 mm hex. drive

• go-through ratchet, 72 teeth, 13 mm inner hex.
• extension bar, 75 mm, with go-through hole
• 11 sockets, Gear Lock, length 25 mm sizes: 4.5 – 5 – 5.5 – 6 – 7 – 8 – 9 – 10 – 11 – 12 – 13 mm
• adaptor, 13 mm outer hex. to 6.3 mm 1/4″ outer square
• bit adaptor, 13 mm outer hex. to 6.3 mm (1/4″) inner hex., allows the ratchet be used as a standard 6.3 mm (1/4″) ratchet
• adaptor, 13 mm inner hex. to 6.3 mm (1/4″) inner square, to use the extension bar

19 mm hex. drive

• go-through ratchet, 72 teeth, 19 mm inner hex.
• extension bar, 75 mm, with go-through hole
• 11 sockets, Gear Lock, length 30 mm sizes: 8 – 10 – 11 – 12 – 13 – 14 – 15 – 16 – 17 – 18 – 19 mm
• adaptor, 19 mm outer hex. to 10 mm (3/8″) inner hex., allows the ratchet be used as a standard 10 mm (3/8″) ratchet
• adaptor, 19 mm inner hex. to 10 mm (3/8″) inner square, to use the extension bar

22 mm hex. drive

• go-through ratchet, 72 teeth, 22 mm inner hex.
• extension bar, 75 mm, with go-through hole
• 7 sockets, Gear Lock, lenght 38mm: SW 19 – 20 – 21 – 22 – 23 / lenght 42 mm: 24 – 25 mm
• adaptor, 22 mm outer hex. to 12.5 mm (1/2″) inner hex., allows the ratchet be used as a standard 12.5 mm (1/2″) ratchet
• adaptor, 22 mm inner hex. to 12.5 mm (1/2″) inner square, to use the extension bar

Bits, drive outer hex. 6.3 mm (1/4″):

• 2 slots: 4 – 5 mm
• 2 cross slots: PH1 – PH2
• 3 T-Star (for Torx): T10 – T15 – T20
• 3 internal hexagon: 4 – 5 – 6 mm