Vökvadæla f. tunnur.

Features
* Design for fast transfer of lubricants, solvents, agricultural and industrial chemicals, additives, and other non-corrosive liquids up to 55 gallon drums.
* Chrome and Zinc plated for lasting quality and appearance.
* Equipped with self-adjusting telescopic suction tube for pumping contents completely.
* With two brass ring inside the piston unit, it can pump agricultural, industrial chemicals an other non-corrosive liquids.
* 2″ NPT bung nut equipped.
* Cushioned vinyl handle for comfortable action.
* Removable apout threaded for garden hose fittings.
* Dispenses approx. 250 c.c. – 300 c.c. liquids per stroke.

Instructions
1. Loosen rod nut (8) properly.
2. Pull piston rod (12) through pump head (10) to meed and join the hole of handle (1) with handle rivet (3). Lock it with split pin (4) into the hole of handle (3).
3. Retighten the rod nut (8) properly.
4. Assemble spout unit (20) through coupling nut (21) into the output of pump head (10). Adjust spout to proper direction and tighten it.
5. Screw telescopic tube unit (30) (31) into female thread of base (29) and tighten it.
6. Open the cap of drum, extend telescopic tube unit (30) (31) to utmost length. Put whole set of pump into drum, tighten base (29) to the open end of drum.
7. Now your facility is ready for act.

Important
* It´s necessary to adjust from rot nut (8) to fit proper tightness after assemble the pump.
* For first few strokes, it could be possible without output due to air pocket inside the pump. The flowage of prime output smoothly after air pocket expelled completely few strokes later.